What are the safety precautions are required in welding section?

Welders should wear work or shop clothes without openings or gaps to prevent arc rays from contacting the skin. Those working close to arc welding should also wear protective clothing. Clothing should always be kept dry, including gloves.

What precautions does a welder need to take before using a arc welding outfit?

Always protect yourself and that you:

• Use approved earplugs or ear muffs if noise level is high.
• Wear a welding helmet fitted with a proper shade of filter lens (see ANSI Z49.
• Wear approved safety glasses.
• Use protective screens or barriers to protect others from flash and glare; warn others not to watch the arc.

What is PPE for welding?

Eye, face, hand/arm, head and body protection (leather gloves, leather apron, gauntlets, safety glasses with side shields, welders helmet or welders goggles) are required that are appropriate to the potential hazards encountered during welding, cutting, brazing, soldering, grinding or other spark producing operations.

What must be used to protect bystanders from electric arc flashes when welding?

Arc eye can be prevented by using welding goggles and helmets. These specialist goggles and helmets have dark face plates and therefore prevent exposure to the eyes. As well as protecting those doing the welding, it is important to protect bystanders.

Why PPE is important in welding?

The use of personal protective equipment (PPE) at all times is a good and safe practice by welders to protect from exposure to hazards and injuries during welding or cutting.

Which is a safety precaution or practice when working with electricity?

Never touch or try repairing any electrical equipment or circuits with wet hands. It increases the conductivity of the electric current. 2. Never use equipment with frayed cords, damaged insulation or broken plugs.

What are safety precautions during gas cutting?

RIGHT OPERATION:-

• Keep the cylinder upright and away from hot jobs.
• Fix the DA and oxygen regulator to the respective cylinders after ensuring free from dirt or grease.
• Connect the cutting hoses to the regulators and cutogen with hose clamps.
• Open the cylinder and check for leakage by soap water test at the joints.