What is the thing on the side of my sink?

The chrome thing on your sink that looks like an upside-down juice glass is an air gap fitting for your dishwasher. This is because air gap fittings prevent contaminates from the drain line from flowing back into your water supply and mixing with water that you may use for drinking, showering, or washing dishes.

What is the little thing next to my kitchen faucet?

A dishwasher air gap (sometimes called a “kitchen air gap” or “kitchen sink air gap”) is usually a small metal cylinder near your sink faucet with a few holes in it, designed to prevent dirty water from draining back into your dishwasher.

What is the circle thing on the sink?

The circle tab is an extra tap placement found on many sinks, which allows people to switch the position of their taps and have them on the other side of the basin if they wish.

Does a kitchen sink need an air vent?

A sink needs a vent because the pressure put on the drain pipe when water flows down the drain pipe needs to equalize. The air needs to escape the drain pipe in order for the sink to vent.

What is the kitchen air gap for?

An air gap is a simple way to make certain wastewater and contaminants never re-enter your clean water supply. There is enough distance between the mouth of the faucet and the sink’s rim to ensure that dirty water will never backflow into your kitchen faucet and pollute the clean water supply.

What is a sink flange?

The flange in your bathroom sink is the collar that surrounds the sink’s drain. It is usually made of metal, but may be made of plastic and coated in a metallic finish. If this flange cracks or erodes, it can cause water to leak through the sink at this point.

What are the parts of a sink faucet?

Parts of a sink faucet include a water spout, controls, gaskets, flanges, aerators, washers and an assortment of screws, depending on the kitchen or bathroom sink faucet you have in your home.

What is the metal piece on the sink?

The metal piece you see in the sink’s drain opening is the drain assembly. Some drain assemblies have grids inside of them, while others may have a pop-up stopper that raises and lowers in the drain assembly to either keep water in the sink or to let it out.

How do I know if my sink is vented?

You can check by running a large amount of water down the drain. If it’s not vented correctly, it will gurgle, bubble and pop. A new drain should run freely.

Where is the air gap on my sink?

Air gap fittings have a decorative heading that extends above the counter, usually next to your faucet or soap dispenser. This heading houses the vertical air gap. Air gaps are notched with holes that will release water into your sink if the drain becomes clogged or the tubing is obstructed.

What are the different parts of a kitchen sink?

Kitchen sinks include many of the same parts that you’ll find on any sink, like a basin, faucet, control lever or handles and hot and cold water supply lines. However, kitchen sinks often have a few extra parts. Here’s what you’ll find on a kitchen sink assembly:

Why do kitchen sinks have holes in the side?

One of the main purposes of the side holes is to prevent against a flooding sink. When the water is rushing into the sink and overwhelms the main drain, the holes help drain water that has reached the top of the basin.

What is the part of the sink that holds the water?

Basin: The basin is the part of the sink that holds water from the faucet. It has a drain in the bottom that allows water to escape. A variety of sizes, styles and materials are used for bathroom, kitchen and utility sink purposes.

What is that Chrome thing on the bottom of my Sink?

What is that chrome thing on my sink? The chrome thing on your sink that looks like an upside-down juice glass is an air gap fitting for your dishwasher. An air gap fitting is a fixture that prevents dirty water from entering your dishwasher through the drain line and contaminating the dishes placed there.