What is RBL aviation?
Table of Contents
What is RBL aviation?
The RBL (Regional Belt Loader) is the latest product developed by TLD at its Saint Lin factory in France. This innovative belt loader addresses the unique requirements for regional/narrow body aircraft up to A320 series and B737.
What are buttock line stations?
a buttock line is a vertical plane that is parallel to the center line. buttock lines are distanced measured in inches, right and left from the vertical centerline of the fuselage. These lines run parallel to the vertical centerline. These lines are numbered just as fuselage stations are numbered.
What is the difference between water line and buttock line in aircraft?
Like the stations, water line 0 is generally a bit below the aircraft, possibly to have WL 100 at the center of the fuselage, or WL 0 could be at the bottom of the fuselage. Butt lines (BL) designate location left/right on the aircraft, generally centered in the middle.
What is aircraft water line?
In aircraft design, the term “waterline” refers to the vertical location of items on the aircraft. This is (normally) the Z axis of an X × Y × Z coordinate system, the other two axes being the fuselage station ( X ) and buttock line ( Y ).
How many zones are in an aircraft?
Aircraft Major Zones
| Major Zone | Area |
|---|---|
| 200 | Upper half of the fuselage to the rear pressure bulkhead |
| 300 | Empennage, including fuselage aft of the rear pressure bulkhead |
| 400 | Power plants and struts or pylons |
| 500 | Left-wing |
What is station number in aviation?
Station numbers are given in inches forward or aft of the datum line. Fuselage station numbers forward of the datum line are negative (−) and station numbers aft of the datum line are positive but are not usually shown with a positive (+) sign. Figure 2-4 Fuselage and wing stations.
Do airplanes have glass windows?
The main thing to know is that aircraft cabin windows are not made of glass, but with something called “stretched acrylic”. A typical commercial airplane passenger window, showing outer pane, inner (or middle) pane with bleed hole, and scratch pane.
What is datum of aircraft?
Datum (reference datum)—an imaginary vertical plane or line from which all measurements of arm are taken. The datum is established by the manufacturer. Once the datum has been selected, all moment arms and the location of CG range are measured from this point.
What is aircraft zoning?
Zones are designated physical areas of an aircraft that identify where maintenance activities occur. A maintenance task can span multiple zones. In the Zones application, you can create, delete, or activate zones on an aircraft.
What are zones in aircraft?
Where is the buttock line of an aircraft?
Aviation Glossary – Buttock Line. A line used to locate a position to the right or left of the center line of an aircraft structure. The longitudinal axis of the aircraft that serves as the reference location for positions to the left and right of center. The positions are usually dimensioned in inches.