How can you determine if another aircraft is on a collision course?

How can you determine if another aircraft is on a collision course with your aircraft? The other aircraft will always appear to get larger and closer at a rapid rate. There will be no apparent relative motion between your aircraft and the other aircraft. The nose of each aircraft is pointed at the same point in space.

What is an effective way to scan for traffic in front of your airplane during climb?

What is an effective way to scan for traffic in front of your airplane during climb? Lower the nose periodically and clear the area, and then transition to cruise climb when altitude permits.

Which techniques should a pilot use to scan for traffic to the right and left during straight and level flight?

Which technique should a pilot use to scan for traffic to the right and left during straight-and-level flight? Systematically focus on different segments of the sky for short intervals. You just studied 10 terms!

What is the best scanning technique to locate traffic while flying at night?

At night, peripheral vision detects motion the best. When scanning for traffic, spend a few seconds looking at each section of your field of view, paying attention to your peripheral vision to detect other aircraft. If you see another plane, don’t try to focus directly on it.

Which technique should a remote pilot use to scan for traffic?

Which technique should a remote pilot use to scan for traffic? A remote pilot should. Systematically focus on different segments of the sky for short intervals (no more than 10°). concentrate on relative movement detected in the peripheral vision area.

Which technique should a pilot or visual observer use to scan for traffic?

Which technique should a visual observer use to scan for air traffic during a remote flight? Systematically focus on different segments of the sky for short intervals.

How is effective traffic scanning accomplished?

Effective scanning is accomplished by a series of short, regularly-spaced eye movements that bring successive areas of the sky into the central visual field. Each movement should not exceed 10°, and each area should be observed for at least one second to enable detection.

Can you fly at night without a landing light?

Technically a landing light is only required if the airplane is operated for hire but most pilots would not consider flying at night without one even if not required. Landing lights are important to enable other pilots to see and avoid your airplane as well as to help you see the runway.

Which technique should a remote pilot use to scan for traffic a remote pilot should group of answer choices?