What are the safety rules when using a stand drill?

Power Drill Safety Tips

• Avoid Baggy Clothing. Loose sleeves, jewelry and hair can be a hazard when you are operating a power drill.
• Wear Protective Gear.
• Secure Your Work Piece.
• Drill Pilot Holes.
• Use a Drill Stand.
• Properly Set the Drill Bit.
• Use a Enter Punch to Start Holes.
• Apply Proper Pressure to the Drill.

What safety cover is always kept in place on a drill press?

Safety Goggles or a Face Shield must be worn while using the drill press. Check with the instructor to see if ear protection is required as well. 3. Install drill bits and make all adjustments with the power off.

What are 20 safety rules you should follow when using the drill press?

Drill Press Safety Rules

1. Run drill at correct RPM for diameter of drill bit and material.
2. Always hold work in a vise or clamp to the drill table.
3. Use a correctly ground drill bit for the material being drilled.
4. Use the proper cutting fluid for the material being drilled.
5. Remove chips with a brush, never by hand.

Should you wear gloves while operating a drill press?

Do not wear gloves, rings, watches, or bracelets while working with a drill press. Do not set speeds, adjust, or measure work until machine is completely stopped. Do not force the drill with extra pressure.

What should you never leave in the chuck of a drill press?

Do not leave chuck key in a drill chuck. Make adjustments and remove key immediately. Do not hold work by hand when drilling holes; secure the work with clamps or vices. Do not stop rotation of chuck and spindle with your hand.

What are three large rules to follow when using compressed air?

See the list below for 3 “Nevers” and 4 “Always” rules of the compressed air.

• NEVER POINT IT AT YOURSELF OR ANOTHER PERSON!
• NEVER USE IT TO CLEAN CLOTHING OR HAIR!
• ALWAYS FOLLOW PRESSURE RATINGS AND LIMITATIONS!
• ALWAYS CHECK THE CONDITION OF HOSES AND LINES BEFORE USE!
• ALWAYS WEAR PROPER PPE!

What power tools should you not wear gloves with?

You absolutely do not wear gloves while using rotating power tools. The caveat to this rule is tools with 2 handles like chainsaws and metabos.

Why are hand gloves not recommended in drilling operation?

This is one situation in which PPE can actually lead to injuries instead of protecting the worker. Wearing gloves or loose clothing around heavy machinery is severely dangerous and should be avoided due to the risk of entanglement. Injuries from entanglement can take many forms and vary in severity.

What two things should you never do with compressed air?

While you can use compressed air for cleaning certain objects at low pressures and with a nozzle, you should never use compressed air for cleaning clothing or human skin.

How important is a drill press?

The drill press has significant advantages over the hand-held drill, the principal one being accuracy . Its design means that it will drill at precise angles to the workpiece (usually ninety degrees); and it will drill holes of identical size and depth and position as many times as you wish.

What is part of the drill press holds the drill bit?

The spindle is the most important part of the drill press that is used to hold the tool and is responsible for its rotation. The spindle of the tool is held with the help of the arm that is gripped with the column.

What are the types of drill press?

There are three types of drill presses and the bench drill press is one of them. Besides it, the other two drill presses are the pillar and pedestal models. Actually, the main difference between them is represented by the mounting style. The drill press can be mounted on a bench, pedestal or pillar.

What is a safety drill?

A safety drill is a drill that is practised to prepare people for an emergency.