What is the area of a 750 MCM wire?
Table of Contents
What is the area of a 750 MCM wire?
380.0
Standard sizes
| Area | NEC copper wire ampacity with 60/75/90 °C insulation (A) | |
|---|---|---|
| (kcmil, MCM) | (mm2) | |
| 750 | 380.0 | 535 |
| 800 | 405.4 | 555 |
| 900 | 456.0 | 585 |
What size is 750 MCM?
Terminal Plug, Aluminum, Conductor Size: 750 MCM, Conductor Diameter: . 998″. For use in Terminating Copper or Aluminum Wire.
What is cable conductor area?
Cross sectional area of the conductor – sometimes called ‘cable size’ Given as mm², it describes the total cross-sectional area of the copper conductor. Cable will be sized 1 mm², 2 mm², 4 mm² etc. and may be written as 1 mm, 2mm, 4mm. This is not the diameter of the cable.
What is 350 MCM wire?
Product Details
| Cable Type | THHN/THWN-2 |
|---|---|
| Wire Size | 350 MCM |
| # of Conductors | 1 Conductor |
| Conductor Material | Bare Copper |
| Stranded or Solid | Stranded |
What is MCM in wire size?
circular mils
MCM is an abbreviation for thousands of circular mils, an old measurement of wire gauge. 1 MCM = 1 kcmil = 0.5067 square milimeters. A mil is 1/1000 inch.
What size is 600 MCM wire?
| WIRE SIZE / STRANDING | Approx. Insulation Outside Diameter | |
|---|---|---|
| AWG / kcmil | Strands | Dia Inches |
| 500 | 37 | 0.925 |
| 600 | 61 | 1.026 |
| 750 | 61 | 1.128 |
What is the diameter of 1000 MCM cable?
1.310
Specifications: Size AWG: 1000. Weight per 1,000 ft: 3263 lbs. Outside Diameter: 1.310.
What is conductor size?
The Gauge size of stranded conductors is often expressed as a combination of the overall size and the size of the individual strand. EXAMPLE: 16 AWG 26/30 – 16 represents the overall gauge size, 26 is the number of strands, 30 is the gauge size of each of the 26 wires.
How do you determine the size of a conductor?
Divide the voltage running through the cable by your target current. If, for instance, 120 volts will act on the cable, and you want 30 amps to run through it: 120 / 30 = 4. This is your target resistance, measured in ohms. 30,000 x 1.724 x 10^-8 = 0.0005172 ohm sq.
What is 600 MCM wire?
THHN-600 MCM wire is intended for general-purpose applications as defined by the National Electrical Code (NEC). It is permitted for new construction or rewiring for the 600-volt applications.
What is MCM in conductor?
MCM is an abbreviation for thousands of circular mils, an old measurement of wire gauge. 1 MCM = 1 kcmil = 0.5067 square milimeters. A mil is 1/1000 inch. Most wire uses AWG. MCM is also used for “million cubic meters.”
What is MCM in cable size?
MCM is an abbreviation for thousands of circular mils, an old measurement of wire gauge. 1 MCM = 1 kcmil = 0.5067 square milimeters. A mil is 1/1000 inch. A wire 200 mils in diameter is 40 MCM.