How many bits are MIPS registers?

MIPS architecture

Bits	64-bit (32 → 64)
Introduced	1985
Version	MIPS32/64 Release 6 (2014)
Design	RISC
Registers

How many registers is used in MIPS?

32 registers
The MIPS R2000 CPU has 32 registers. 31 of these are general-purpose registers that can be used in any of the instructions. The last one, denoted register zero, is defined to contain the number zero at all times.

How many total instructions does MIPS support?

The MIPS instruction set makes the compromise of supporting three instruction formats. One format, used for instructions such as add and sub, has three register operands. Another, used for instructions such as lw and addi, has two register operands and a 16-bit immediate.

How many bits are used to select a data register?

Although the register is 32-bits, only the 8 least significant bits are used in transmission, and 12 least significant bits are used for reception.

How many bytes are in a MIPS instruction?

Instructions are all 32 bits. byte(8 bits), halfword (2 bytes), word (4 bytes) a character requires 1 byte of storage.

How many total bits is a machine instruction?

6 The Power of the Stored Program. A program written in machine language is a series of 32-bit numbers representing the instructions. Like other binary numbers, these instructions can be stored in memory.

Why are register 5 bits?

2 Answers. “For example, the MIPS processor has 32 general-purpose registers, so it takes 5 bits to specify which one to use. In contrast, the MIPS has a 4 gibibyte memory capacity, so it takes 32 bits to specify which memory cell to use.

How many bits are there in the register code part?

How many bits are there in operation code, the register code part and the address part? OP-code 32 – 1 – 18 – 6 bits = 7 bits. Option (C) is correct.