Is it OK to use regular bleach in a pool?
Table of Contents
Is it OK to use regular bleach in a pool?
Clorox itself recommends using between 100 and 200 ounces of regular-strength bleach per 10,000 gallons of pool water — one gallon is 128 ounces, and many bottles of bleach are available in one-gallon or half-gallon sizes. Pool professionals tend to recommend more conservative amounts of bleach.
Can I use regular Clorox bleach in my pool?
When chlorinating wading pools, use 1/8 cup per 100 gallons of new water. Mix required amount of Clorox® Regular Bleach2 with 2 gallons of water and scatter over surface of pool. (Clorox® Regular Bleach2 will not harm plastic pools.) Do not reenter pool until the chlorine residual is between 1 to 3 ppm.
Is pool bleach the same as household bleach?
They are identical in every way, with the exception of strength. Household bleach is usually a 6\% concentration (although some of the cheaper stuff is 3\%), while pool chlorine can typically be found in strength between 10\% and 12\%. All of this is sodium hypochlorite, and works the same in sanitizing your water.
How do you use bleach instead of chlorine?
If using bleach, all you need to do is to use 1/8 cup for every 100 gallons of water. It’s best to pour it with a skimmer to avoid the harsh chemicals from harming your skin while swimming. Popular brand names such as Clorox are recommended to use, as they have the powerful ingredients to disinfect your pool.
Can you substitute bleach for pool shock?
The CDC recommends 5 tablespoons of regular bleach per gallon of water to properly disinfect a surface. When using liquid pool shock, dilute it at a rate of 2.5 to 3 tablespoons per gallon of water.
Can you put bleach in a vinyl pool?
High concentrations of chlorine (above 1.5 ppm) will attack the liner and bleach it, thus damaging it. Any level below this range will weaken its ability to kill off bacteria. The best practice is to dissolve chlorine tablets in a bucket of water, and then pour the solution into your pool.
What is the difference between bleach and chlorine?
The basic difference between chlorine and bleach is that chlorine is a natural element, while bleach is a solution of many elements. Usually, chlorine is used in swimming pools and water treatment plants to disinfect and clean the water for sanitation.
How much bleach do I need to open my pool?
What is this? If you need to calculate how much bleach or Clorox you need to shock your pool, you will have to use 1/2 gallon of bleach per 10,000 gallons of water to raise the chlorine levels by 5 ppm.
How do I get my pool clear?
7 Ways to Clear Cloudy Pool Water
- Balance free chlorine (FC) levels.
- Eliminate ammonia.
- Get rid of young algae.
- Monitor and balance pH and TA levels.
- Correct calcium hardness (CH) levels.
- Backwash filter or replace filtering agent.
- Remove foreign particles and mineral deposits, scrub, and vacuum up the pool.
How much bleach should I add to my pool?
If you need to calculate how much bleach or Clorox you need to shock your pool, you will have to use 1/2 gallon of bleach per 10,000 gallons of water to raise the chlorine levels by 5 ppm.
Will liquid bleach hurt pool?
High concentrations of chlorine (above 1.5 ppm) will attack the liner and bleach it, thus damaging it. Any level below this range will weaken its ability to kill off bacteria.
Is bleach the same as pool shock?
Swimming pool shock contains 12.5\% sodium hypochlorite (bleach) vs. 6-8.5\% for Clorox (bleach). At a 12.5\% concentrate, liquid pool shock is approximately 2x’s stronger than Clorox bleach. The CDC recommends 5 tablespoons of regular bleach per gallon of water to properly disinfect a surface.