How do you use multiple mic inputs?

If you need to connect more than four microphones to one USB input, the most cost-effective solution is likely to be a USB mixer with as many inputs as you need to support the number of mics you want to use.

How do I record two audio sources in GarageBand?

Record to multiple audio tracks simultaneously

1. In GarageBand on Mac, set the instrument or microphone input source for each track you want to record to.
2. Choose Track > Configure Track Header.
3. Click the Record Enable button in the track header of each track you want to record to.

Can I use two microphones at the same time?

Using two microphones at the same time is a more common request than you would think. It is useful if you have multiple microphones connected to a Windows PC in a boardroom and you want to combine the into one virtual mic so that software like Skype or Lync can listen to both mics at the same time.

What should I not put between my mic and mic input?

Also, never put anything between your mic and your microphone input. Any device in-between will likely block phantom power and/or degrade the sound quality. Also, puttting mic inputs on a patchbay is not recommended. Always connect your mic directly to the XLR mic input.

How do I connect multiple external audio interfaces to one device?

Set up an Aggregate Device. When you create an Aggregate Device, make sure to connect all external audio interfaces first. From the Finder, choose Go > Utilities. Open the Audio MIDI Setup application. Click the Add (+) button on the bottom-left corner in the Audio Devices window and chose Create Aggregate Device.

How far apart should mics be from each other?

The mics would be across the room from each other and about 7-9 ft away from each other. Right now we both have headsets that have mics that like to pick up quite a bit of background noise, but where thinking of upgrading to usb desktop mics and was hoping for some suggestions that wont break the bank.